Wing 1500
-
- Inside our Factory, Lokefoil developped the wing for wingfoiling to sail with amazing facilities.
- This wing allows you to fly easily at really low speed, in holes or for manoeuver.
- Program :
- Program : freeride, freestyle, wave
- Specification :
- Dimension : wing span : 940mm wing chord : 190mm
- Area : 1485cm²
- Material : Carbon HR
- Weight : gr
- Compatible : Envol (+ adaptater), LK1, LK1 2020, LK1 Performance.
412,50€
(Excl. tax)
SKU
Aile_en_1500
Stabilizer 250
-
- Inside our Factory, Lokefoil developped this Stabilizer to WingSail in every conditions.
- His design avoid the risk of cut and makes it strong.
- Program :
- Program : freeride, freerace, wave
- Setting : shim 1 et 2.
- Specification :
- Dimension : Wing span : 390mm wing chord : 90mm
- Area : 250cm²
- Material : Carbon HR
- Weight : gr
- Compatible : LK1, LK1 2020, LK1 Performance.
250,00€
(Excl. tax)
SKU
stab_en_250
DEEP TUTTLE PLATE
Deep tuttle aluminium plate black
You can screw it to your board with M8 or M6.
The screws are not delivered with the plate.
Weight : 850gr
157,50€
(Excl. tax)
SKU
PLATINE_FR
PLATE SQUARE KIT
Square kit + M8 screws for fixing the plate to the board equipped with US rail.
The kit includes:
4 x stainless steel screw M8 torx 35
4 X square stainless steel (14mm X 14mm ep 4.5mm)
16,67€
(Excl. tax)
SKU
plate_square_kit_en
Screw Kit head lk1 / plate
Screw kit to attach the LK1 to the plate.
The kit includes:
1 x stainless steel screw M6 torx length 60mm
1 x stainless steel screw M6 torx length 50mm
2 x washer cuvette full stainless steel
9,17€
(Excl. tax)
SKU
KIT_vis_talon_lk1_platine
Wingfoil Pack for LK1
The pack includes :
- deep tuttle plate
- wing 1500 or 1100
- Stabilizer 250 or 150
- screw kit head LK1 / PLATE
- screw wing LK1
-
- Inside our Factory, Lokefoil developped the wing for wingfoiling to sail with amazing facilities.
- This wing allows you to fly easily at really low speed, in holes or for manoeuver.
- Program :
- Program : freeride, freestyle, wave
- Specification :
- Dimension : wing span : 940mm wing chord : 190mm
- Area : 1485cm²
- Material : Carbon HR
- Weight : gr
- Compatible : Envol (+ adaptater), LK1, LK1 2020, LK1 Performance.
-
- Inside our Factory, Lokefoil developped this Stabilizer to WingSail in every conditions.
- His design avoid the risk of cut and makes it strong.
- Program :
- Program : freeride, freerace, wave
- Setting : shim 1 et 2.
- Specification :
- Dimension : Wing span : 390mm wing chord : 90mm
- Area : 250cm²
- Material : Carbon HR
- Weight : gr
- Compatible : LK1, LK1 2020, LK1 Performance.
657,50€
(Excl. tax)
SKU
pack_wing_en
Stabilizer 300
-
- Inside our Factory, Lokefoil developped this Stabilizer to Sail in every conditions.
- His design avoid the risk of cut and makes it strong.
- Program :
- Program : freeride, freerace
- Setting : shim 1 and 2.
- Specification :
- Dimension : wing span : 480mm wing chord :90mm
- Area : 300cm²
- Material : Carbon HR.
- Weight : 205gr
- Compatible : LK1, LK1 2020, LK1 Performance, aluminium fuselages.
220,00€
(Excl. tax)
SKU
Stabilizer_LK300_en
PERFORMANCE wing
-
- Inside our Factory, Lokefoil developped the Performance wing to gain speed and glide in the widder wind range and keeping essential lift.
- The versatility of this wing allows you to go sailing at high speed for reaching/downwind or upwind.
- Program :
- Program : race, freerace, freeride
- Top Speed : 29Knots
- Specification :
- Dimension : wing span : 880mm wing chord : 125mm
- Area : 800cm²
- Matériaux : Carbon HR.
- Weight : 715gr
- Compatible : Envol (+ adaptater), LK1, LK1 2020, LK1 Performance.
375,00€
(Excl. tax)
SKU
aile_lk1_performance
Adjusting Shim LK1 2020
Adjusting Shim for LK1 2020 2X (+1 ; -1 ; -2)
Compatibility for LK1 2017, 2018, 2019
8,33€
(Excl. tax)
SKU
cales_de_reglages_lk1
Stabilizer LIGHT WIND (LK450)
-
- Inside our Factory, Lokefoil developped this Stabilizer to Sail in the lightest breeze.
- His big area allows to sail easily at low speed
- Program :
- Program : freeride, freerace
- Setting : shim 1 et 2.
- Specification :
- Dimension : Wing span : 540mm wing chord :90mm
- Area : 450cm²
- Material : Carbon HR .
- Weight : 255gr
- Compatible : LK1, LK1 2020, LK1 Performance.
250,00€
(Excl. tax)
SKU
stab_LK450_en
Stabilizer PERFORMANCE
-
- Inside our Factory, Lokefoil developped this Stabilizer to gain speed une the widder wind range.
- The versatility of this stabilizer allows you to go sailing at high speed for reaching/downwind or upwind.
- Program :
- Program : race, freerace, freeride
- Setting : shim 1 et 2.
- Specification :
- Dimension : wing span : 450mm wing chord :90mm
- Area : 250cm²
- Material : Carbon HR.
- Weight : 145gr
- Compatible : LK1, LK1 2020, LK1 Performance.
250,00€
(Excl. tax)
SKU
stab_performance
brass inserts for M6 screws
Insert brass Ø12 for screw M6.
sold in pairs
8,33€
(Excl. tax)
SKU
insert_brass
brass inserts for M8 screws
Brass inserts Ø12 for screw M8.
Inserts used for mast to fuselage assembly (x3).
16,67€
(Excl. tax)
SKU
insert_brass
Adaptator LK1-Envol
Part allowing to use the wings LK1200, LK850 et LK600 on the masts Envol 2015, 2016 et 2017.
25,00€
(Excl. tax)
SKU
adaptator_en
100 UHM deep tuttle mast
-
100 MAST
- This mast will allow you to sail high on the water and give you control stiffness and maximum glide.
- Available in two version (carbon UHM and HM) this mast is the most efficient in the LOKEFOIL 2022 range.
- Program :
- WIND : race, speed, freerace
- WING : freerace, freeride
- KITE : freerace, freeride
- Specifications :
- Head : deep tuttle, tuttle
- Register : PWA
- Dimensions : length 100 cm
- Material : hight modulus Carbon or ultra hight modulus Carbon
- Weight : 2.5 kg
- Compatibility : 65 C, 70, 90 C, 95, 100/100+ C, 110
1741,67€
(Excl. tax)
SKU
mat-100-uhm-deep-tuttle-shop-fr
100 HM deep tuttle mast
-
100 MAST
- This mast will allow you to sail high on the water and give you control stiffness and maximum glide.
- Available in two version (carbon UHM and HM) this mast is the most efficient in the LOKEFOIL 2022 range.
- Program :
- WIND : race, speed, freerace
- WING : freerace, freeride
- KITE : freerace, freeride
- Specifications :
- Head : deep tuttle, tuttle
- Register : PWA
- Dimensions : length 100 cm
- Material : hight modulus Carbon or ultra hight modulus Carbon
- Weight : 2.5 kg
- Compatibility : 65 C, 70, 90 C, 95, 100/100+ C, 110
1191,67€
(Excl. tax)
SKU
mat-100-hm-deep-tuttle-shop-fr
HM wing 900
-
900 HM WING
- This race wing is the best for sailing in up and downwind in light wind conditions.
-
- Spécifications :
- Program : up/down, freeride
- Register : PWA
- Characteristics :
- Dimensions : total span 960 mm, chord 125mm area 900cm²
- Matérial : hight modulus carbon
- Weight : 1.2 kg
595,83€
(Excl. tax)
SKU
aile-900-hm-shop-fr
Wing 900
-
900 HM WING
- This race wing is the best for sailing in up and downwind in light wind conditions.
-
- Spécifications :
- Program : up/down, freeride
- Register : PWA
- Characteristics :
- Dimensions : total span 960 mm, chord 125mm area 900cm²
- Matérial : hight strength carbon
- Weight : 1.2 kg
458,33€
(Excl. tax)
SKU
aile-900-shop-fr
HM wing 750
-
750 HM WING
- This wing will allow you to navigate by favoring speed and acceleration in windfoil. Developed by our riders for PWA race in light wind (from 7kts).
-
- Specifications :
- Program : slalom, speed
- Register : PWA
- Characteristics :
- Dimensions : total span 930 mm, chord 105mm area 750cm²
- Material : hight modulus carbon
- Weight : 1 kg
595,83€
(Excl. tax)
SKU
aile-750-hm-shop-fr
Wing 750
-
750 HM WING
- This wing will allow you to navigate by favoring speed and acceleration in windfoil. Developed by our riders for PWA race in light wind (from 7kts).
-
- Specifications :
- Program : slalom, speed
- Register : PWA
- Characteristics :
- Dimensions : total span 930 mm, chord 105mm area 750cm²
- Material : hight strength carbon
- Weight : 1 kg
458,33€
(Excl. tax)
SKU
aile-750-shop-fr
Wing 590
-
590 HM WING
- This wing will allow you to navigate by favoring speed and acceleration in windfoil. Developed by our riders for PWA salom race in medium wind (12kts-17kts).
-
- Specifications :
- Program : slalom, speed
- Register : PWA
- Characteristics :
- Dimensions : total span 820 mm, chord 87 mm area 590cm²
- Material : hight strength carbon
- Weight : 0.85 kg
412,50€
(Excl. tax)
SKU
aile-590-shop-fr
Stabilizer 240
-
240 HM stabilizer
- This very versatile stabilizer is dedicated to performance, it will allow you to navigate with hight stability and will adapt to a wide range of uses.
-
- Specifications :
- WIND : VMG, slalom,freeride,freerace
- WING : freeride
- SUP & SURF : freeride
- KITE : freerace
- Characteristics :
- Dimensions : Span 440 mm, chord 65 mm area 240cm²
- Material :Hight strength carbon
- Weight : 0.3 kg
220,00€
(Excl. tax)
SKU
stab-240-shop-sp-en
Deck Washer
White washer to distribute force of the foil.
the pack includes 2 washers.
16,67€
(Excl. tax)
SKU
deck_washer_en
rake wedges
Set of stainless steel rake wedges :
- 2X1mm
- 1X2mm
- 1X3mm
- 1X4mm
27,50€
(Excl. tax)
SKU
cales_rake_en
Screw Pack LK1
For lk1 2018/2019/2020
The screw pack includes :
- 2 small inox washer
- 5 screw A4 torx size 20
- 2 screw A4 torx size 16
- 2 screw size 80
- 2 screw size 90
- 2 screw size 100
- 2 screw size 120
12,50€
(Excl. tax)
SKU
screw_pack_en
Screw pack 70 and 95 fuselage
The screw pack includes :
- 3 screw torx M6 size 16 (stainless stell)
- 4 screw torx M8 size 20 (stainless stell)
- 3 screw torx M8 size 25 (stainless stell)
23,33€
(Excl. tax)
SKU
screw_pack_fr
SCREW PACK 100 AND 110 FUSELAGE
The screw pack includes :
- 2 screw torx M3 size 12 (stainless stell)
- 4 screw torx M6 size 16 (stainless stell)
- 5 screw torx M8 size 20 (stainless stell)
- 3 screw torx M8 size 25 (stainless stell)
- 4 screw torx M8 size 30 (stainless stell)
23,33€
(Excl. tax)
SKU
screw_pack_fr